• Image
    Cheminee.Filigree Elephant Pendant
  • Image
    Cheminee.Two Filigree Rings and Samples

West African Filigree: In Senegal!

Ready for a virtual get-away?! Filigree is a common technique in West African countries and is a specialty of Senegalese jewelers. Join Matthieu Cheminee and master artisan Moussa Tall in Senegal for this demo-centered virtual workshop, as they focus on the making of traditional West African filigree rings.

Matthieu and Moussa will teach attendees how to make a frame, how to prepare the wire into small filigree units that will be used to fill the frame, how to properly install them, how to prepare the solder, how to solder everything together, and finally to form and finish the ring. All while using very few tools!

This class will be taking place in Senegal and is therefore an experimental virtual workshop! Should the class experience any technical connectivity issues, it will be held again at a later date when Matthieu returns to his studio!

Meet the instructor

photo of

Matthieu moved from Paris to New-Mexico when he was 19, where for seven years he studied Navajo, Hopi and Zuni jewelry techniques. He was immediately drawn to stamping, making concho belts and bracelets. He then moved to Mali, West-Africa and worked for a few years with the Fulani, Touareg and Bambara jewelers. 

In 1999, Matthieu settled in Montreal Canada and continued his studies by going to a jewelry school and learning a more classical part of the trade. Over the years, Matthieu has returned to Africa regularly.

In 2014, Tim McCreight and Mattheiu Cheminee created the Toolbox Initiative, a non-profit organization that helps jewelers in West Africa through the gifts of donated tools.

“I have been stamping and making stamps since the beginning and have developed a form of stamping design by creating patterns that fill the entire piece of metal. This is called “tessellation”.

Matthieu has written two books,  “Legacy, jewelry techniques of West Africa“  and “The Art of Stamping”, both published at Brynmorgen Press.

Visit Matthieu's website or instagram page for more info on his work.

Materials & Tools

The following supplies will be used for course demonstrations and objectives. A suggested item and/or vendor has been provided below for reference. Click the vendor name (in red) to be redirected to a page where you can find the item. The quantities needed for each item are listed first. If ordering, please be aware that some items may come in larger quantities than needed for this class. We recommend not opening an item's packaging until the day of the workshop. Student participation during or in-between class sessions is strongly encouraged but not required - observers are welcome.

Raw/metal materials (note wood sizing is approximate but stay close to the measurements):

  • 1 x 10"x6"x3/4" pine or cedar wood

  • 2 x 4"x2"x2" pine or cedar wood

  • 24 feet x fine silver round wire - 0.4mm (Rio Grande)

  • 12" x sterling wire - 0.7mm x 1.2mm or 1.2mm square (Rio Grande)

Hand tools:

Torch setup:

Other/miscellaneous items: 

  • hard/stable work surface

  • escapement files - optional

  • safety glasses 

  • ruler

  • old files/nail setters/chisels

  • fine point permanent marker 

  • glass jars/containers - for oil and vermiculite

 

Stay Connected