Cloisonné Enamels

Course Description

About this course

Have you done a little enameling? Want to kick it up a notch? This virtual course jumps fully into the technique of cloisonné enamel. In cloisonné, thin wire is used to create walls and line work within enamel and can allow for a sharp separation of color, creating high contrast imagery. Within the “cells” created by the wire you can use one or multiple colors, opaque and transparent enamels. Offering a myriad of design possibilities and results!

Participants will be shown step-by-step how to create their first cloisonné piece, bending the wires, firing, wet packing, and how to finish the enamel surface. Problem solving your design in cloisonné wire will be discussed as well. Participants should expect to work out of class and follow along with the demonstrations, so they can come to class with questions. 

For more information about virtual courses, visit our Virtual Course FAQ page. 

Please read the Materials & Tools tab! 

Meet the Instructor

Jennifer Wells

Jennifer Wells is a studio artist and educator, originally from the U.S but currently living and working in Italy. She has completed several artist-in- residencies at: Arrowmont School of Arts and Crafts in Gatlinburg, TN, Pocosin Arts in Columbia, NC and the Jentel Foundation near Banner, WY; and has taught for Universities throughout the U.S and for study abroad programs based in Italy. Currently she serves on the Board of Vita Institute and teaches for Santa Reparata International School of Arts in Florence, Italy. Jennifer also teaches short workshops on various enameling and metalsmithing techniques throughout Europe and the U.S. Her work is in the collection of the Enamel Arts Foundation and the Racine Museum.

Materials & Tools 

The following supplies will be used for course demonstrations and objectives. A suggested item and/or vendor has been provided below for reference. Click the vendor name (in red) to be redirected to a page where you can find the item. The quantities needed for each item are listed first. If ordering, please be aware that some items may come in larger quantities than needed for this class. We recommend not opening an item's packaging until the day of the workshop. Student participation during or in-between class sessions is strongly encouraged but not required - observers are welcome.

Metal/raw materials:

Enamels (Note the enamels below are suggestions - if you have a collections of Thompson enamels, you can use those. Instructor will be using W. G. Ball enamels):

  • 2oz min. x 1010 Foundation White (Etsy)
  • 2oz min. x 2020 Clear Flux (Etsy)
  • 2oz x 2520 Transparent Aqua (Etsy)
  • 2oz x 2310 Transparent Peppermint (Etsy)
  • 2oz x 2340 Transparent Glass Green (Etsy)
  • 2oz x 2820 Transparent Pink (Etsy)
  • 2oz x W. G. Ball 432 Turquoise Blues (All Craft)
  • 2oz x W. G. Ball 7493 Light Olive Green (All Craft)
  • 2oz x W. G. Ball 7488 Olive Green (All Craft)
  • 2oz x W. G. Ball 7528 Rosewood (All Craft)
  • 2oz x W. G. Ball 7524 Medium Dusky Rose (All Craft)

Hand tools:

Enameling setup with kiln:

Enameling setup with torch:

  • all enameling items listed above - minus kiln
  • 1 x torch setup - Silversmith or similar style  (Rio Grande)
  • 1 x #2 or larger torch tip - if using Silversmith (Rio Grande)
  • 1 x striker or lighter - Silversmith system has one (Rio Grande)
  • 1 x tripod or fire bricks with screen (Rio Grande)

Other/miscellaneous items: 

  • hard work surface
  • fan and open window or ventilation system
  • safety glasses 
  • ear protection
  • pencil and notebook - note taking
  • rags/towels
  • paper towels
  • old toothbrush
  • distilled water
  • old magazines
  • Elmer's glue
  • ajax / bar keeper's friend
  • square / block eraser
  • dust mask - N95 suggested
  • 2oz jars with lids - 1 for each enamel
  • pliers with different noses - to help bend wire




Jennifer Wells


December 14 -16, 2021


10:00 AM -12:00 PM


2 days

Basic and above

No Class Dates

December 15

Virtual - Eastern Time Zone
Add to My Calendar